ID....Parking Brake hardware kit.

this pic is of the parking brake hardware kit (check signature) there are 6 sets of 2 in this kit could someone please tell me what they are and what they are for?
Marty
1998 Lincoln Navagator
5.4L 330CID v8 FI (L)
107,500 MILES

(This post was edited by martyg7162 on Sep 7, 2008, 1:59 PM)
The 2 springs hold the parking brakes together to keep them off the drum.(1 on each side)
The 4 clips with the pins in them are to hold the shoes to the backing plate.(2 on each side)
The other oieces are the self adjusters. The star wheel will screw in the threaded rod and the rod and star wheel assembly will slide together.(1 on each side)
When you disassemble the parking brakes, look closely and you will see where they go.


http://www.publicsurplus.com/...owse/cataucs?catid=4 <<< Click on link and see our surplus vehicles for sale.
Being way2old is why I need help from younger minds I'm writing this as added info for peoples later search on the subject.
Ok after a visual of the existing parking brake(the other one snapped off and was flopping around)
I now know what each piece is for and where it go. First are the spring there are 2 different springs the heavier one goes on the top of the pads the lighter one on the bottom the pins and clips hold the pads to the backing plate where the pin comes through the plate out the hole in the pad and the clip is inserted over the pin and then turned 90 degrees the star shaped nut, threaded rod and coupling fit into the slots on the bottom of the pads and you spread the pads By turning the star nut so that the pads spread.
We can conclude this thread and I'd like to thank those of you that help me
Marty
1998 Lincoln Navagator
5.4L 330CID v8 FI (L)
107,500 MILES
Car Repair | Car Diagnosis | Brake Repair | Transmission Repair | Trouble codes | car repair problems | auto insurance question | Car Logos Pictures |