2006 pontiac montana headlight and signal light

I need to replace the front signal light in my wife's montana (2006).
From the owners manual it says you have to take out the pin and a bolt on the headlight and pull
out the headlight. I have done this but can't pull out the headlight.
Has anyone had any experience with the montana and knows what to do???

Thank you in advance. often times on headlites and taillites, the gasket between the lamp housing and body can stick so the housing dont come out real easy. if u can get your hand behind it, try rocking it back and forth to 'break it loose.' or if theres room, try pushing it out from behind. Thank you. Problem solved.
There is a pin to take out and one bolt and the headlight will pull right out.
Turns out there is a knob behind the headlight that has to be pulled out and it was sticking.
Also had to remove 4 pins on the body to move the cowl a bit so the headlight would clear. wow, what a project just to replace a stupid bulb, huh? unfortunately thats the way cars are going anymore.

anyways, glad u got it solved. and thanks for letting us know.


topic closed due to being solved.Car Repair Talk's forum.