Car Repair<

2003 s10 blazer driven thru standing water

My name is Joe. Well we had some hard rain this morning and I drove thru standing water I know I had the ground clearance for. Cars made it thru. Well a truck going the other way caused a wake that rushed over my hood. Car stalled. I got a push the rest of the way to work by a friend and sprayed electrical connections with starter fluid to dry them out. I let the car sit all day and when I try to start it I hear the solonoid pull in but it does not turn over. Even with a jump start nothing. Any advice would be appreciated. do the lites, wipers and other electric stuff work normal?

start with the battery. use a dvom to make sure its fully charged, which is around 12.6 volts. then hold the dvom leads on the battery terminals while someone trys to start it. if the voltage drops below 10 volts with the key in the start position, the battery is shot. You might have got water in the intake enough to fill a cylinder. I would also pull all the plugs then try to crank it. If it does crank you will probably see some water shooting out of a spark plug hole.


transmanCar Repair Talk's forum.



Pre:2005 Nissan Murano Exhaust Question   Next:Fuel And Starting Issue 95 Jimmy

  • failed my state emissions test
  • 1994 dodge shadow wont start
  • Replacing Fuel Filter in Saturn SL - Question??
  • 1999 Ford Explorer door lock problem
  • 96 Neon Lower Idle Issue
  • New Distributor and no spark 1993 GMC Yukon
  • 2003 Nissan Sentra Screeching
  • 2004 ford taurus serpentine belt problems
  • Car Parts: Air Conditioning System / Body / Lighting and Signaling System

    OBD-Ⅱ Trouble Codes:OBD-Ⅱ Trouble Codes

    P0108 | P0135 | P0171 | P0174
    P0300 | P0320 | P0325
    P0401 | P0420 | P0430 | P0440 | P0441 | P0442 | P0455

    links:Car Logo / Autoi / Car Repair Talk's forum / Car Specifications