hi, i have a 2000 chevy cavalier and i'm worried about what is wrong. when i push on the gas pedal there is a loud whining noise but only when i push on the gas. i looked while someone else did it and it looked like a pulley was loose but i could be wrong. and idea what it could be?
Answer
Is this while you're going down the road or sitting still? If it's sitting still, then one of the bearings in one of the pulleys is bad. It is most likely the idler pulley, but there are bearings in the alternator, water pump, A/C compressor, and power steering pump as well. If you can see the pulley moving in and out while the engine is running, then you need to get it fixed immediately. The bearings in all of these can be changed, but most mechanics won't attempt it and would recommend replacement of the whole unit. I would agree with them. If it is doing this while you are moving down the road, though, it is probably the transmission. The engine speed doesn't change when in motion, unless the transmission shifts gears, but the load on the transmission can do all sorts of things.
Car Repair Talk's forum.
Pre: 98 blazer 4x4, rear differentials, gear ratios Next: 1999 Jeep Cherokee, jeep cherokee, water droplets
DOHC, pushrod engines, sohc engine
Question abouth a reverberator, pep boys, reverberator
1997 Pontiac Sunfire will not start..., 1997 pontiac sunfir
1993 ford E305, pep boys, pot metal
ford ranger quarter glass, pep boys, quarter glass
motor swap, chevy s10, pep boys
Rear Pads, rear disc brakes, advance auto parts
camry driver seat, seat work, floorboards
Car Parts: Air Conditioning System / Body / Lighting and Signaling System
OBD-Ⅱ Trouble Codes:OBD-Ⅱ Trouble Codes
P0108 | P0135 | P0171 | P0174
P0300 | P0320 | P0325
P0401 | P0420 | P0430 | P0440 | P0441 | P0442 | P0455
links:Car Logo / Autoi / Car Repair Talk's forum / Car Specifications