How to Replace a Power Mirror in a Dodge Durango

Disconnect the negative battery cable before starting.

Take the inside door trim panel off your Dodge Durango. Remove all screws and clips that hold it in place around the outside and near the arm rest.

Pull the sponge-like mirror flag door seal off the inside assembly of the mirror. Disconnect the wire attached to the mirror.

Remove the bolts and nuts that attach the door frame and mirror.

Separate the entire mirror assembly from the door, and completely remove it.

Put the new mirror in place, and attach the nuts and bolts in the same order you removed them. Secure them tightly before moving to the next Step.

Connect the mirror wire to the Durango's electrical supply wire coming out of the door panel. Replace the mirror flag door seal.

Put the door trim panel back in place, snap all clips into place and replace all screws.