Difficulty: Moderately ChallengingInstructionsThings You'll Need:
- Razor blade
- RTV sealant
- New gasket
- Socket wrench
- Socket set
- Engine degreaser
- Shop rag
- Step 1
Remove the valve cover to engine head retaining nuts. These nuts are located around the perimeter of the valve cover.
- Step 2
Pull the valve cover off the head of the engine.
- Step 3
Remove all of the old gasket material from both the head and valve cover mating surfaces with a razor blade.
- Step 4
Clean the mating surfaces with engine degreaser and a shop rag.
- Step 5
Apply RTV sealant to the mating surfaces.
- Step 6
Set the gasket on top of the engine head. Make sure the gasket is oriented properly. It will only fit one way.
- Step 7
Press the valve cover to the engine head and tighten all valve cover retaining nuts.
Car Parts: Air Conditioning System / Body / Lighting and Signaling System
OBD-Ⅱ Trouble Codes:OBD-Ⅱ Trouble Codes
P0108 | P0135 | P0171 | P0174
P0300 | P0320 | P0325
P0401 | P0420 | P0430 | P0440 | P0441 | P0442 | P0455
links:Car Logo / Autoi / Car Repair Talk's forum / Car Specifications