Car Repair<

How to Replace the Fuses in a Nissan Sentra

Any car, including a Nissan Sentra, can blow a fuse at any time. Whether you own an original 1962 model or a more recent one, it's the same process to replace one and only takes a few minutes of your time to do.



Difficulty: Moderately EasyInstructionsThings You'll Need:
  • Fuse puller
  • Same rating fuse
  1. Step 1

    Start by turning off the car. Locate the main fuse box under the dashboard of the passenger compartment of your Nissan Sentra.

  2. Step 2

    Pull the cover down to open and towards you to remove it. Read the inside panel of the fuse box to figure out the location of the fuse you must replace.

  3. Step 3

    Use the fuse puller inside to remove the appropriate fuse. Look at the wire in the middle of the fuse to see if it's burnt.

  4. Step 4

    Replace the blown fuse with a new one of the same rating. Verify the fuse's rating against the inside cover of the fuse box. For example, the 2006 Nissan Sentra has a 10 amp mini fuse.

  5. Step 5

    Push the fuse in and close the cover. Check the fuse once the car is started.

Car Repair Talk's forum.



Pre：How to Replace the Fuses in a Nissan Altima   Next：How to Replace the Fuses in an Oldsmobile Alero

  • How to Remove the Windshield Reservoir
  • How to Change Motor Home Shocks
  • How to Replace the Throttle Body in a Mitsubishi 3000GT
  • How to Replace the Thermostat in a 1998 BMW 323IC
  • How to Replace a Thermostat in a Lincoln Mark 8
  • How to Install a New Steering Rack in a Chrysler Sebring
  • How to Replace a Blower Motor in a 1998 Buick Regal LS
  • How to Clear Clogged Windshield Washers

    • Car Parts: Air Conditioning System / Body / Lighting and Signaling System

    OBD-Ⅱ Trouble Codes:OBD-Ⅱ Trouble Codes

    P0108 | P0135 | P0171 | P0174
     P0300 | P0320 | P0325
     P0401 | P0420 | P0430 | P0440 | P0441 | P0442 | P0455

    links:Car Logo / Autoi / Car Repair Talk's forum / Car Specifications

     
    powered by