Car Repair<

How to Replace the Fuses in a Mercury Villager

In 1993, Ford introduced the Mercury Villager minivan to its lineup. If you have a model made from 1993 to 2002, you can easily replace a blown fuse for an electrical issue yourself. All the model years have a similar set up, so you can locate and replace the fuse in just a few minutes.



Difficulty:
Moderately EasyInstructionsThings You'll Need:
  • Fuse puller
  • Fuse with same amperage
  1. Step 1

    Locate the Mercury Villager minivan's fuse box below and to the left of the steering wheel by the brake pedal. Open the panel to remove the fuse puller.

  2. Step 2

    Read the cover of the fuse panel to identify the location of the fuse needing to be replaced.

  3. Step 3

    Use the fuse puller and remove the appropriate fuse. Verify that it's not working by looking at the inside to see whether the wire is burned out or not.

  4. Step 4

    Replace the broken fuse with one of the same amperage. Check the amperage on the fuse box cover to make sure you have the right one.

  5. Step 5

    Snap the new fuse firmly in place and close the fuse box. Restart the Mercury Villager to verify the new fuse is working.

Car Repair Talk's forum.



Pre:How to Replace the Fuses in a Mazda6   Next:How to Replace the Fuses in a Nissan Altima

  • How to Change Motor Home Shocks
  • How to Replace a Blower Motor in a 1998 Buick Regal LS
  • How to Replace the Thermostat in a 1998 BMW 323IC
  • How to Clear Clogged Windshield Washers
  • How to Replace the Throttle Body in a Mitsubishi 3000GT
  • How to Install a New Steering Rack in a Chrysler Sebring
  • How to Replace a Thermostat in a Lincoln Mark 8
  • How to Remove the Windshield Reservoir
  • Car Parts: Air Conditioning System / Body / Lighting and Signaling System

    OBD-Ⅱ Trouble Codes:OBD-Ⅱ Trouble Codes

    P0108 | P0135 | P0171 | P0174
    P0300 | P0320 | P0325
    P0401 | P0420 | P0430 | P0440 | P0441 | P0442 | P0455

    links:Car Logo / Autoi / Car Repair Talk's forum / Car Specifications