How to Remove 350Z Brake Calipers

The Nissan 350Z is a popular sports car from Nissan; it is the successor to the popular Nissan 300Z model. Fit for a performance vehicle, the car comes equipped with high-end brakes from the factory. Like anything else though, the factory calipers can wear out or break down, and will need replacement. You might also want to replace them with higher performance calipers. Either way, you first have to remove the old ones from the car's braking system.

Difficulty: EasyInstructionsThings You'll Need:

Jack
Jack stands
Tire iron
Brake line clamp
Line wrench
3/8-inch ratchet and socket set

Step 1
Lift up the front of the car using the jack and secure the car on jack stands. Verify that the car is secure before taking off the wheels, then remove the front wheels using the tire iron.
Step 2
Place the brake line clamp on the rubber brake line hose that connects the hard brake line to the brake caliper. Clamp it in place, then remove the brake line from the brake caliper, using the line wrench.
Step 3
Unbolt the brake caliper from the front steering knuckle, using the 3/8-inch ratchet and socket. Finally, pull the caliper off of the brake rotor and set it to the side.